Caracterización metrológica de las básculas utilizadas en el proceso de galvanizado en la empresa SUSEINCO SAS y desarrollo de un software para su validación in situ
The project was carried out due to the requirement of the SUSEINCO company in the galvanizing area, where they presented uncertainty problems with the weight measurements obtained from the scale. For this reason, an instrument calibration process was designed and implemented using statistical techni...
Guardado en:
Autor principal: | |
---|---|
Otros Autores: | |
Formato: | Trabajo de grado (Pregrado y/o Especialización) |
Lenguaje: | spa |
Publicado: |
Universidad Antonio Nariño
2021
|
Materias: | |
Acceso en línea: | http://repositorio.uan.edu.co/handle/123456789/5085 |
Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
Sumario: | The project was carried out due to the requirement of the SUSEINCO company in
the galvanizing area, where they presented uncertainty problems with the weight
measurements obtained from the scale. For this reason, an instrument calibration
process was designed and implemented using statistical techniques - least squares
method -, data collection and comparison processes to verify that reliable
measurement values are obtained with the minimum degree of uncertainty.
In order to obtain a metrological assurance, a process of data collection of the
measurements, calibration techniques and comparison of results was carried out,
through the coefficient F which indicates the level of certainty of the sample and
through which the makes the decision whether to accept or reject the results. |
---|