Desarrollo de un modelo de elementos finitos del conjunto herramienta-sujeción, para su caracterización dinámica en el análisis de vibraciones en el proceso de fresado
In this finished grade work, a verification of the results was carried out and an own solution of the dynamic behavior of the clamping tool assembly was proposed by a FEM, mentioning the adequate stability regions to avoid the Chatter in the surface finish in the milling processes and Obtain the res...
Guardado en:
| Autores principales: | , |
|---|---|
| Otros Autores: | |
| Formato: | Trabajo de grado (Pregrado y/o Especialización) |
| Lenguaje: | spa |
| Publicado: |
Universidad Antonio Nariño
2021
|
| Materias: | |
| Acceso en línea: | http://repositorio.uan.edu.co/handle/123456789/5045 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | In this finished grade work, a verification of the results was carried out and an own
solution of the dynamic behavior of the clamping tool assembly was proposed by a FEM,
mentioning the adequate stability regions to avoid the Chatter in the surface finish in the
milling processes and Obtain the respective analysis of external forces by means of a
simulation in ANSYS, for a face milling process.
In this study, the modal behavior is verified to determine the relationship of the dynamic
movement in the tool, acting as a tensile stress. Additionally, the harmonium analysis was
carried out in natural frequencies for different types of contacts, to determine the regions
where resonance and anti-resonance occurs in the system. Taking into account that the
type of contact of the tool and tool holder interacts as a friction, spring and rigid contact as
a function of a force.
Applying external forces on the edges of the tool gives results on the deformation in the
face of the tool and the directional deformation in the component (x, y), giving a solution to
the Chatter stop that occurs at certain frequencies of oscillation producing resonance when
the tool generates cut in the piece of work and analyzing the most stable regions. Where
steel is the most significant material for its mechanical properties producing a greater
displacement.
Keywords: C |
|---|
