Diseño del accionamiento electromecánico para un sistema de banda transportadora de mineral de hierro
It’s carried out the design process of an electromechanics drive system for a belt conveyor system for iron ore transportation at 2500 ton per hour. From the requirements in the driving pulley, it is chosen the most convenient drive system and it’s performed the detailed design of the mechanical com...
Guardado en:
| Autores principales: | , |
|---|---|
| Otros Autores: | |
| Formato: | Trabajo de grado (Pregrado y/o Especialización) |
| Lenguaje: | spa |
| Publicado: |
Universidad Antonio Nariño
2021
|
| Materias: | |
| Acceso en línea: | http://repositorio.uan.edu.co/handle/123456789/4959 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | It’s carried out the design process of an electromechanics drive system for a belt conveyor
system for iron ore transportation at 2500 ton per hour. From the requirements in the driving
pulley, it is chosen the most convenient drive system and it’s performed the detailed design
of the mechanical components, such as the selection of the 250 kW electric motor and the
electronic frequency inverter, the coupling from the motor to the gearbox and the coupling
from the gearbox to the driving pulley, the selection of the backstop mounted in the pulley
and the selection of the three gear stages parallel axis gearbox. It´s carried out the gear
calculus following the ISO 6336:2006 standard and the fatigue strength-based analysis of
the shafts. The design process ends with the assembly drawings of the whole drive system
and the production drawings of the gearbox. It´s found that it exists a wide variety of
alternatives of arrangement and equipment options, choosing one of the more optimal in
terms of configuration, simplicity and safety. |
|---|
