Diseño de compactadora oleohidráulica con capacidad de 10kg/h que permita la reducción del volumen de desechos orgánicos e inorgánicos para la planta de tratamiento de aguas residuales del Hospital Universitario Hernando Moncaleano Perdomo
The present research work, the design of a compactor was carried out to reduce the volume of organic and inorganic waste from the screening system of the Wastewater Treatment Plant (WWTP) of the Hernando Moncaleano Perdomo University Hospital in the city of Neiva. The objective of this work is to de...
Saved in:
| Main Authors: | , |
|---|---|
| Other Authors: | |
| Format: | Trabajo de grado (Pregrado y/o Especialización) |
| Language: | spa |
| Published: |
Universidad Antonio Nariño
2021
|
| Subjects: | |
| Online Access: | http://repositorio.uan.edu.co/handle/123456789/4779 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | The present research work, the design of a compactor was carried out to reduce the volume
of organic and inorganic waste from the screening system of the Wastewater Treatment
Plant (WWTP) of the Hernando Moncaleano Perdomo University Hospital in the city of
Neiva.
The objective of this work is to design a compactor to reduce the volume and weight of
waste, since it has a large percentage of water. In order to improve the collection and
storage processes and reduce the cost of disposal, since the company in charge of carrying
out this work charges per kg collected.
A bibliographic review was carried out which contributed significantly to the present
investigation. In principle, the black box diagram was used and, in its requirements, the
systems that made up the compactor were proposed. Using the brainstorming method, the
most appropriate options were proposed and the decision criteria were established through
the objective tree, finally the selection matrix was used where the best evaluated option
was chosen.
Through the calculations, the components, materials, powers, pressures, and compaction
force required by the compactor were defined; For the structural simulation, the
SOLIDWORKS software was used with the help of the simulation complement where a
type of static study was used and a maximum deformation of 0.92 mm was obtained, a Von
Mises stress of 153,355,488 𝑁/𝑚2 and a safety factor of 1.3. |
|---|
