Estudio de aplicabilidad de material biocompuesto con fibra de cascarilla de arroz para la fabricación de engranajes de diente recto para aplicaciones de baja carga
The project is based on studying the application of biocomposite material with rice husk (CA) for the manufacture of flat tooth gears for low power transmission systems; This idea arises from the need to find different alternatives to the metal and plastic gears used in the industry. Power transmiss...
Guardado en:
| Autor principal: | |
|---|---|
| Otros Autores: | |
| Formato: | Trabajo de grado (Pregrado y/o Especialización) |
| Lenguaje: | spa |
| Publicado: |
Universidad Antonio Nariño
2021
|
| Materias: | |
| Acceso en línea: | http://repositorio.uan.edu.co/handle/123456789/4774 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | The project is based on studying the application of biocomposite material with rice
husk (CA) for the manufacture of flat tooth gears for low power transmission systems;
This idea arises from the need to find different alternatives to the metal and plastic
gears used in the industry. Power transmission systems are designed mainly with flat
tooth metal gears, characterized by being heavy, expensive to manufacture, difficult
to machine, very noisy and require constant lubrication, therefore it is necessary to
study design alternatives for these mechanical systems.
The objective of the project is to develop a straight tooth gear, using biocomposite
material of AC fiber and polymeric matrix, to demonstrate the applicability according
to its mechanical characteristics; developing the project under a descriptive field and
applied research, where the design and manufacturing parameters for the gears to
be studied will be defined, to later carry out mechanical resistance tests and obtain
quantitative data with which to define the probable applications for material gears
compound.
An easy machining type of MC-based gear was obtained, applicable to power
transmissions with torques less than 15 𝑁𝑚. The limes could be applied as
substitutes for metal and plastic gears in low-power transmission applications. |
|---|
