Diseño de un sistema de aprovechamiento de calor residual generado en el horno de secado de la empresa transformadores GVR Energy S.A.S. localizada en la ciudad de Ibagué.
This project carries out the design of a system to take advantage of the residual heat that is expelled during the gas combustion process in the drying oven on the production line of the transformers company GVR Energy S.A.S. (at 138 ° C) in order to reduce the energy consumption of the curing oven,...
Guardado en:
| Autor principal: | |
|---|---|
| Otros Autores: | |
| Formato: | Trabajo de grado (Pregrado y/o Especialización) |
| Lenguaje: | spa |
| Publicado: |
Universidad Antonio Nariño
2021
|
| Materias: | |
| Acceso en línea: | http://repositorio.uan.edu.co/handle/123456789/4679 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | This project carries out the design of a system to take advantage of the residual heat that
is expelled during the gas combustion process in the drying oven on the production line of
the transformers company GVR Energy S.A.S. (at 138 ° C) in order to reduce the energy
consumption of the curing oven, since its heating operation is by means of 1200 Ohm
electrical resistances (up to 120 ° C). Likewise, reduce the radiation from the drying oven
that expels its combustion products into the environment and thus contribute to the
improvement of the environment (about 22 tons of CO2 equivalent are no longer emitted
into the atmosphere). |
|---|
