Banco didáctico de ensayos a torsión
This work presents the process followed to obtain the manufacturing and tuning of a didactic bench that performs torsion tests on standardized specimens according to the ASTM-E143 standard. The first activity was that a sensitivity analysis was performed on the prototype turning angle and torque mea...
Guardado en:
| Autores principales: | , |
|---|---|
| Otros Autores: | |
| Formato: | Trabajo de grado (Pregrado y/o Especialización) |
| Lenguaje: | spa |
| Publicado: |
Universidad Antonio Nariño
2021
|
| Materias: | |
| Acceso en línea: | http://repositorio.uan.edu.co/handle/123456789/2426 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | This work presents the process followed to obtain the manufacturing and tuning of a didactic
bench that performs torsion tests on standardized specimens according to the ASTM-E143
standard. The first activity was that a sensitivity analysis was performed on the prototype turning
angle and torque measurement system, and this was carried out based on the theory of error;
having these criteria, the error made in the measurement system was determined. Then the
electronic devices required for the measurements were purchased. Following this, the required
parts were manufactured in the local market, guided by the detailed design drawings, to
subsequently carry out the assembly, adjustments and calibration of the prototype were carried
out, and tests were carried out to verify correct operation. .
Finally, pedagogical material was made with a step-by-step of how to carry out the tests and a
Maintenance Manual to guarantee a longer useful life for the prototype. |
|---|
