Diseño y construcción de un sistema mecánico para el monte y desmonte de ruedas de camión rin 22.5
To perform preventive brake maintenance and change of grease to the bearings of a truck, two people They must remove the “dual”, which is the pair of wheels coupled, this has a weight of 250kg, for this each operator It is located on each side of the wheels, it has to be pulled until take it out, an...
Guardado en:
| Autores principales: | , |
|---|---|
| Otros Autores: | |
| Formato: | Tesis/Trabajo de grado - Monografía - Pregrado |
| Lenguaje: | Español |
| Publicado: |
Universidad Antonio Nariño
2025
|
| Materias: | |
| Acceso en línea: | https://repositorio.uan.edu.co/handle/123456789/12231 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | To perform preventive brake maintenance
and change of grease to the bearings of a truck, two people
They must remove the “dual”, which is the pair of wheels
coupled, this has a weight of 250kg, for this each operator
It is located on each side of the wheels, it has to be pulled until
take it out, and then leave it on the side of the truck while it
performs maintenance. If either of the two operators performs
Improper movement risks injury
lumbar. These injuries occur constantly in the
assembly and disassembly of the “dual”, with this project we want
change the way this work is currently done, to
For this reason, a mechanism was developed that allows this task to be carried out
safer way for operators |
|---|
