Rediseño del sistema de lubricación forzada de un compresor reciprocante de gas natural
Forced lubrication in a reciprocating compressor that transfers natural gas, consists of injecting oil into the cylinders, with a pressure greater than that of the gas being compressed, in order to lubricate the liner, piston and rings, to thus guaranteeing its integrity and expected useful life. Th...
Guardado en:
| Autores principales: | , |
|---|---|
| Formato: | Trabajo de grado (Pregrado y/o Especialización) |
| Lenguaje: | spa |
| Publicado: |
Universidad Antonio Nariño
2022
|
| Materias: | |
| Acceso en línea: | http://repositorio.uan.edu.co/handle/123456789/5954 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | Forced lubrication in a reciprocating compressor that transfers natural gas, consists of
injecting oil into the cylinders, with a pressure greater than that of the gas being compressed,
in order to lubricate the liner, piston and rings, to thus guaranteeing its integrity and expected
useful life. The purpose of the project is to minimize oil consumption for forced lubrication
of reciprocating compressor cylinders, given that the annual operating cost exceeds the
budget assigned by planning. This is achieved by carrying out a redesign in the lubrication
system, which consists of modifying the supply of replacement oil to the engine-compressor
group, and thus reducing scheduled engine oil changes by half, achieving annual economic
savings of 24 million pesos cop. The proposed redesign also implies the installation of an
additional filtration system to remove particles and impurities from the oil, guaranteeing an
entry in optimal conditions to the cylinders, making adequate lubrication, avoiding
premature damage to the liners and pistons, with which it is expected as an added benefit a
longer service life of the lubricated components. The proposal also manages to reduce the
negative environmental impact, by reducing emissions of oil degraded by operational use
and reducing the risk of lubricators, by minimizing the number of oil changes, which implies
handling barrels weighing around 200 kg .
Keywords: Lubrication, oil, compressor, reciprocating, natural gas. |
|---|
