Rediseño de una maquina inyectora de PET para la repotenciación de su funcionamiento en la empresa Bolten Ltda. de la ciudad de barranquilla
In this project, the redesign of the system of the injection unit of the FT 300 plastic injection machine will be carried out for the company BOLTEN LTDA. which is working at 33% efficiency due to the volumetric capacity of the machine. In the project, it will be carried out on the plastic injection...
Guardado en:
| Autores principales: | , |
|---|---|
| Otros Autores: | |
| Formato: | Trabajo de grado (Pregrado y/o Especialización) |
| Lenguaje: | spa |
| Publicado: |
Universidad Antonio Nariño
2021
|
| Materias: | |
| Acceso en línea: | http://repositorio.uan.edu.co/handle/123456789/4525 |
| Etiquetas: |
Agregar Etiqueta
Sin Etiquetas, Sea el primero en etiquetar este registro!
|
| Sumario: | In this project, the redesign of the system of the injection unit of the FT 300 plastic injection
machine will be carried out for the company BOLTEN LTDA. which is working at 33%
efficiency due to the volumetric capacity of the machine. In the project, it will be carried out
on the plastic injection process and the machines that carry out this process, the operation
and its most important characteristics are investigated in order to carry out the design and
later carry out the repowering of this. To develop the project, it was necessary to apply
knowledge of hydraulic systems, automation, instrumentation and programming of logic
controllers; to interpret the diagrams: electrical and hydraulic to facilitate preventive and
corrective maintenance. A user manual was produced, and Bolten Ltda. Personnel were
trained on the correct operation of the machine. |
|---|
