Análisis y evaluación de la incidencia de las microburbujas en el tratamiento de agua, a través del desarrollo y estudio de un sistema de operación continua para tratamiento primario de aguas residuales
This project wants to show the design of a prototype of a continuous flow primary treatment system. Thus, this system is composed in principle by four stages in which the application of the primary treatments involved, such as sedimentation, is evaluated with the design and development of a hydrocyc...
Saved in:
| Main Authors: | , |
|---|---|
| Other Authors: | |
| Format: | Trabajo de grado (Pregrado y/o Especialización) |
| Language: | spa |
| Published: |
Universidad Antonio Nariño
2021
|
| Subjects: | |
| Online Access: | http://repositorio.uan.edu.co/handle/123456789/2807 |
| Tags: |
Add Tag
No Tags, Be the first to tag this record!
|
| Summary: | This project wants to show the design of a prototype of a continuous flow primary treatment
system. Thus, this system is composed in principle by four stages in which the application
of the primary treatments involved, such as sedimentation, is evaluated with the design and
development of a hydrocyclone, adding the generation of microbubbles, which also involves
the own design and elaboration of two prototypes generators, which were designed from a
microporous filter for water that generates air bubbles when entering air and that through
the use of pressurized water.
These bubbles are cut to generate sizes less than 100 microns, with measurements under
a microscope thanks to the image analysis in Matlab, allowing the design of a low-cost
system,
In addition to this, it must be said that its help is shown for the primary treatment of waters
contaminated with certain materials, where it also shows signs of accumulation,
agglomeration and separation of suspended and dissolved solids, the results are evaluated
according to turbidity and coloration of the resulting water with respect to its previous stages. |
|---|
